[srslte-users] eNB underflow using USRP B210

Saeid Hashemi saeidh at gmail.com
Fri Aug 10 19:46:16 UTC 2018


Apologies, I misunderstood that.

The log level is at "warning" level, and I tried changing the n_prb to 25
and lower but still had that issue.

On Fri, Aug 10, 2018 at 2:03 PM Saeid Hashemi <saeidh at gmail.com> wrote:

> I'm using the default, which as you said seems to have been set to logging
> level of warning.
> What would be the lightest option?
>
> On Fri, Aug 10, 2018 at 4:34 AM Kewin Rausch <krausch at fbk.eu> wrote:
>
>> Hey there,
>> Are you tried to move the logging level to Warning (in enb.conf)?
>>
>> Generating a large amount of data to be dumped into the log file can
>> affect physical workers and slow them.
>>
>> Cheers,
>> Kewin R.
>>
>> On Fri, Aug 10, 2018 at 10:23 AM Saeid Hashemi <saeidh at gmail.com> wrote:
>>
>>> Hello everyone,
>>>
>>> I have a setup with the basic srsLTE and EPC on the same machine with
>>> default configuration installed.
>>>
>>> I’m getting the stream of LLLLLL... on the terminal running srsenb, and
>>> the red TX light on the B210 flickers. RX green light seems to be fine
>>> though.
>>>
>>> Using USB 3 and the same hardware runs Open Air Interface without a
>>> problem.
>>>
>>> Has anyone had this issue or knows what it’s about? Any help would be
>>> greatly appreciated!
>>>
>>>
>>> Regards,
>>> Saeid
>>> _______________________________________________
>>> srslte-users mailing list
>>> srslte-users at lists.softwareradiosystems.com
>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>
>>
>> --
>> Le informazioni contenute nella presente comunicazione sono di natura privata
>> e come tali sono da considerarsi riservate ed indirizzate esclusivamente
>> ai destinatari indicati e per le finalità strettamente legate al
>> relativo contenuto. Se avete ricevuto questo messaggio per errore, vi
>> preghiamo di eliminarlo e di inviare una comunicazione all’indirizzo
>> e-mail del mittente.
>> --
>> The information transmitted is intended only for the person or entity to
>> which it is addressed and may contain confidential and/or privileged
>> material. If you received this in error, please contact the sender and
>> delete the material.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.softwareradiosystems.com/pipermail/srslte-users/attachments/20180810/64f2ee3a/attachment-0001.html>


More information about the srslte-users mailing list