[srslte-users] limeSDR

Justin Tallon justin.tallon at softwareradiosystems.com
Thu Jul 6 09:13:27 UTC 2017


Hey Johann!

Could you possibly delete CMakeCache.txt from your build directory and run
cmake again and send me the terminal output?

Thanks!
Justin

____
Justin Tallon Ph.D.

Software Radio Systems (SRS)
http://www.softwareradiosystems.com

+353-86-067-0753 | justin.tallon at softwareradiosystems.com

On Thu, Jul 6, 2017 at 9:56 AM, Johann T. <johann.tzt at gmail.com> wrote:

> Hi,
>
> Previously I have used srslte with USRP B210 and it worked perfectly. I
> have just received my limeSDR and I would like to use srslte with it.
>
> I have followed the installation procedures as described in this thread.
> The cmake and make were completed without errors and the libSoapySDR.so is
> there in the /usr/lib/x86_64-linux-gnu/ folder. However, when I started
> the cell_search example, it complained that no compatible device was found.
>
> Any suggestions what could be the issue? Do I need to change something in
> the code?
>
> Many thanks!
>
> Regards,
> Johann
>
> PS: Both examples from the LimeSuiteGUI worked fine and my machine is
> running Ubuntu 16.04.
>
>
> On Wed, Jun 14, 2017 at 5:20 PM, Justin Tallon <justin.tallon@
> softwareradiosystems.com> wrote:
>
>> no problem!
>>
>> Justin
>>
>> ____
>> Justin Tallon Ph.D.
>>
>> Software Radio Systems (SRS)
>> http://www.softwareradiosystems.com
>>
>> +353-86-067-0753 <+353%2086%20067%200753> |
>> justin.tallon at softwareradiosystems.com
>>
>> On Wed, Jun 14, 2017 at 4:20 PM, Nicola Bui <nicola.bui at imdea.org> wrote:
>>
>>> You are right. It worked.
>>> I was looking for soapysdr-dev, that's why I could not find it.
>>>
>>> Thanks,
>>>
>>> Nicola Bui
>>>
>>> Research Engineer
>>> IMDEA Networks Institute
>>> Av. Mar del Mediterraneo, 22
>>> 28918 - Leganés (Madrid) - Spain
>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>> fax: +34 481 6965
>>>
>>> On Wed, Jun 14, 2017 at 11:17 AM, Justin Tallon <
>>> justin.tallon at softwareradiosystems.com> wrote:
>>>
>>>> Cool,
>>>>
>>>> Could you try run
>>>>
>>>> sudo apt-get install libsoapysdr-dev
>>>>
>>>> and then delete your CMakeCache.txt file from your build folder and re
>>>> run cmake ?
>>>>
>>>> Thanks!
>>>>
>>>> Justin
>>>>
>>>>
>>>> ____
>>>> Justin Tallon Ph.D.
>>>>
>>>> Software Radio Systems (SRS)
>>>> http://www.softwareradiosystems.com
>>>>
>>>> +353-86-067-0753 <+353%2086%20067%200753> |
>>>> justin.tallon at softwareradiosystems.com
>>>>
>>>> On Wed, Jun 14, 2017 at 4:15 PM, Nicola Bui <nicola.bui at imdea.org>
>>>> wrote:
>>>>
>>>>> Here you are:
>>>>>
>>>>> sudo add-apt-repository -y ppa:myriadrf/drivers
>>>>> sudo apt-get update
>>>>> sudo apt-get install limesuite limesuite-udev limesuite-images
>>>>> sudo apt-get install soapysdr soapysdr-module-lms7
>>>>>
>>>>>
>>>>> Nicola Bui
>>>>>
>>>>> Research Engineer
>>>>> IMDEA Networks Institute
>>>>> Av. Mar del Mediterraneo, 22
>>>>> 28918 - Leganés (Madrid) - Spain
>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>> fax: +34 481 6965
>>>>>
>>>>> On Wed, Jun 14, 2017 at 11:13 AM, Justin Tallon <
>>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>>
>>>>>> I believe that there is also meant to be a libSoapySDR.so file
>>>>>> present alongside them.
>>>>>>
>>>>>> Can you recall all the apt-get commands that you have used to install
>>>>>> Soapy?
>>>>>>
>>>>>>
>>>>>> ____
>>>>>> Justin Tallon Ph.D.
>>>>>>
>>>>>> Software Radio Systems (SRS)
>>>>>> http://www.softwareradiosystems.com
>>>>>>
>>>>>> +353-86-067-0753 <+353%2086%20067%200753> |
>>>>>> justin.tallon at softwareradiosystems.com
>>>>>>
>>>>>> On Wed, Jun 14, 2017 at 4:09 PM, Nicola Bui <nicola.bui at imdea.org>
>>>>>> wrote:
>>>>>>
>>>>>>> Yes, it is. But the name is libSoapySDR.so.0.6 or
>>>>>>> libSoapySDR.so.0.6.0.
>>>>>>> Is it just a bad link?
>>>>>>>
>>>>>>> Nicola Bui
>>>>>>>
>>>>>>> Research Engineer
>>>>>>> IMDEA Networks Institute
>>>>>>> Av. Mar del Mediterraneo, 22
>>>>>>> 28918 - Leganés (Madrid) - Spain
>>>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>>>> fax: +34 481 6965
>>>>>>>
>>>>>>> On Wed, Jun 14, 2017 at 11:06 AM, Justin Tallon <
>>>>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>>>>
>>>>>>>> Hey Nicola!
>>>>>>>>
>>>>>>>> Can you confirm that the libSoapySDR.so is present in your
>>>>>>>> /usr/lib/ or /usr/lib/x86_64-linux-gnu/ folder ?
>>>>>>>>
>>>>>>>> I would not recommend installing source versions on top of binary
>>>>>>>> installations as this can cause conflicts that produce problems down the
>>>>>>>> line.
>>>>>>>>
>>>>>>>> Justin
>>>>>>>>
>>>>>>>> ____
>>>>>>>> Justin Tallon Ph.D.
>>>>>>>>
>>>>>>>> Software Radio Systems (SRS)
>>>>>>>> http://www.softwareradiosystems.com
>>>>>>>>
>>>>>>>> +353-86-067-0753 <+353%2086%20067%200753> |
>>>>>>>> justin.tallon at softwareradiosystems.com
>>>>>>>>
>>>>>>>> On Wed, Jun 14, 2017 at 3:57 PM, Nicola Bui <nicola.bui at imdea.org>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I installed soapy, too.
>>>>>>>>> The cmake log is attached.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> Nicola Bui
>>>>>>>>>
>>>>>>>>> Research Engineer
>>>>>>>>> IMDEA Networks Institute
>>>>>>>>> Av. Mar del Mediterraneo, 22
>>>>>>>>> 28918 - Leganés (Madrid) - Spain
>>>>>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>>>>>> fax: +34 481 6965
>>>>>>>>>
>>>>>>>>> On Wed, Jun 14, 2017 at 10:50 AM, Justin Tallon <
>>>>>>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hey Nicola!
>>>>>>>>>>
>>>>>>>>>> Could you post the output of your cmake ?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks!
>>>>>>>>>> Justin
>>>>>>>>>>
>>>>>>>>>> On 14 Jun 2017 5:41 p.m., "Nicola Bui" <nicola.bui at imdea.org>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Dear all,
>>>>>>>>>>>
>>>>>>>>>>> I am trying to make srsLTE work with LimeSDR, but cmake does not
>>>>>>>>>>> find the LimeSuite package.
>>>>>>>>>>> I am running it on a ubuntu 16.04 pc, limesuite is installed and
>>>>>>>>>>> I correctly went through the tutorial examples of the LimeSuiteGui (both
>>>>>>>>>>> the selfloop and the reception).
>>>>>>>>>>>
>>>>>>>>>>> Any suggestions before I am trying installing limesuite from the
>>>>>>>>>>> sources?
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>> Nicola Bui
>>>>>>>>>>>
>>>>>>>>>>> Research Engineer
>>>>>>>>>>> IMDEA Networks Institute
>>>>>>>>>>> Av. Mar del Mediterraneo, 22
>>>>>>>>>>> 28918 - Leganés (Madrid) - Spain
>>>>>>>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>>>>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>>>>>>>> fax: +34 481 6965
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> srslte-users mailing list
>>>>>>>>>>> srslte-users at lists.softwareradiosystems.com
>>>>>>>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-
>>>>>>>>>>> users
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>> _______________________________________________
>> srslte-users mailing list
>> srslte-users at lists.softwareradiosystems.com
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>
>>
>
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.softwareradiosystems.com/pipermail/srslte-users/attachments/20170706/47eedd3f/attachment-0001.html>


More information about the srslte-users mailing list