[srslte-users] Problem running example with B210

Couto Robson lopesder at tcd.ie
Thu Jun 2 23:22:27 UTC 2016

Both b210 have the both rx2 and tx/rx antennas in channel A.
On 2 Jun 2016 17:48, "Joseph Poirier" <jdpoirier at gmail.com> wrote:

> Is the ue antenna hooked up to RX2 of RF A?
> On Thu, Jun 2, 2016 at 6:23 AM, Couto Robson <lopesder at tcd.ie> wrote:
>> Hello.
>> I am Robson, I am a undergraduate student and have no experience in this
>> area and need to use srsLTE for my internship.
>> I have been trying to run the pdsch_enobeb and pdsch_ue examples from
>> srsLTE without success.
>> I can see the transmitter in the spectrum analyzer, but the receiver
>> seems to not receive the data.
>> The frequency used is 2480MHz and the radios are USRP B210.
>> The computers are two ubuntu i7 laptops.
>> The command at the transmitter is :
>> ./pdsch_enodeb -f 2480000000
>> At the receiver:
>> ./pdsch_ue -f 2480000000 -r 1234
>> I also have tried different gains for receiver and transmitter.
>> The antennas used are recommended for this frequency.
>> Transmitter and receiver were swapped, but the output was the same.
>> The program outputs at the receiver and transmitter are attached.
>> I would be very grateful for any help.
>> Best regards.
>> Robson Couto.
>> _______________________________________________
>> srslte-users mailing list
>> srslte-users at lists.softwareradiosystems.com
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.softwareradiosystems.com/pipermail/srslte-users/attachments/20160603/af12a0a1/attachment.html>

More information about the srslte-users mailing list