[srslte-users] limeSDR

Johann T. johann.tzt at gmail.com
Thu Jul 6 12:42:16 UTC 2017


Hi Justin,

Thanks for your quick response.

I attached here the output from the cmake. It seemed that the soapySDR
module was properly detected.

Regards,
Johann



On Thu, Jul 6, 2017 at 11:13 AM, Justin Tallon <
justin.tallon at softwareradiosystems.com> wrote:

> Hey Johann!
>
> Could you possibly delete CMakeCache.txt from your build directory and run
> cmake again and send me the terminal output?
>
> Thanks!
> Justin
>
> ____
> Justin Tallon Ph.D.
>
> Software Radio Systems (SRS)
> http://www.softwareradiosystems.com
>
> +353-86-067-0753 <+353%2086%20067%200753> | justin.tallon@
> softwareradiosystems.com
>
> On Thu, Jul 6, 2017 at 9:56 AM, Johann T. <johann.tzt at gmail.com> wrote:
>
>> Hi,
>>
>> Previously I have used srslte with USRP B210 and it worked perfectly. I
>> have just received my limeSDR and I would like to use srslte with it.
>>
>> I have followed the installation procedures as described in this thread.
>> The cmake and make were completed without errors and the libSoapySDR.so is
>> there in the /usr/lib/x86_64-linux-gnu/ folder. However, when I started
>> the cell_search example, it complained that no compatible device was found.
>>
>> Any suggestions what could be the issue? Do I need to change something in
>> the code?
>>
>> Many thanks!
>>
>> Regards,
>> Johann
>>
>> PS: Both examples from the LimeSuiteGUI worked fine and my machine is
>> running Ubuntu 16.04.
>>
>>
>> On Wed, Jun 14, 2017 at 5:20 PM, Justin Tallon <
>> justin.tallon at softwareradiosystems.com> wrote:
>>
>>> no problem!
>>>
>>> Justin
>>>
>>> ____
>>> Justin Tallon Ph.D.
>>>
>>> Software Radio Systems (SRS)
>>> http://www.softwareradiosystems.com
>>>
>>> +353-86-067-0753 <+353%2086%20067%200753> |
>>> justin.tallon at softwareradiosystems.com
>>>
>>> On Wed, Jun 14, 2017 at 4:20 PM, Nicola Bui <nicola.bui at imdea.org>
>>> wrote:
>>>
>>>> You are right. It worked.
>>>> I was looking for soapysdr-dev, that's why I could not find it.
>>>>
>>>> Thanks,
>>>>
>>>> Nicola Bui
>>>>
>>>> Research Engineer
>>>> IMDEA Networks Institute
>>>> Av. Mar del Mediterraneo, 22
>>>> 28918 - Leganés (Madrid) - Spain
>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>> fax: +34 481 6965
>>>>
>>>> On Wed, Jun 14, 2017 at 11:17 AM, Justin Tallon <
>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>
>>>>> Cool,
>>>>>
>>>>> Could you try run
>>>>>
>>>>> sudo apt-get install libsoapysdr-dev
>>>>>
>>>>> and then delete your CMakeCache.txt file from your build folder and re
>>>>> run cmake ?
>>>>>
>>>>> Thanks!
>>>>>
>>>>> Justin
>>>>>
>>>>>
>>>>> ____
>>>>> Justin Tallon Ph.D.
>>>>>
>>>>> Software Radio Systems (SRS)
>>>>> http://www.softwareradiosystems.com
>>>>>
>>>>> +353-86-067-0753 <+353%2086%20067%200753> |
>>>>> justin.tallon at softwareradiosystems.com
>>>>>
>>>>> On Wed, Jun 14, 2017 at 4:15 PM, Nicola Bui <nicola.bui at imdea.org>
>>>>> wrote:
>>>>>
>>>>>> Here you are:
>>>>>>
>>>>>> sudo add-apt-repository -y ppa:myriadrf/drivers
>>>>>> sudo apt-get update
>>>>>> sudo apt-get install limesuite limesuite-udev limesuite-images
>>>>>> sudo apt-get install soapysdr soapysdr-module-lms7
>>>>>>
>>>>>>
>>>>>> Nicola Bui
>>>>>>
>>>>>> Research Engineer
>>>>>> IMDEA Networks Institute
>>>>>> Av. Mar del Mediterraneo, 22
>>>>>> 28918 - Leganés (Madrid) - Spain
>>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>>> fax: +34 481 6965
>>>>>>
>>>>>> On Wed, Jun 14, 2017 at 11:13 AM, Justin Tallon <
>>>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>>>
>>>>>>> I believe that there is also meant to be a libSoapySDR.so file
>>>>>>> present alongside them.
>>>>>>>
>>>>>>> Can you recall all the apt-get commands that you have used to
>>>>>>> install Soapy?
>>>>>>>
>>>>>>>
>>>>>>> ____
>>>>>>> Justin Tallon Ph.D.
>>>>>>>
>>>>>>> Software Radio Systems (SRS)
>>>>>>> http://www.softwareradiosystems.com
>>>>>>>
>>>>>>> +353-86-067-0753 <+353%2086%20067%200753> |
>>>>>>> justin.tallon at softwareradiosystems.com
>>>>>>>
>>>>>>> On Wed, Jun 14, 2017 at 4:09 PM, Nicola Bui <nicola.bui at imdea.org>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Yes, it is. But the name is libSoapySDR.so.0.6 or
>>>>>>>> libSoapySDR.so.0.6.0.
>>>>>>>> Is it just a bad link?
>>>>>>>>
>>>>>>>> Nicola Bui
>>>>>>>>
>>>>>>>> Research Engineer
>>>>>>>> IMDEA Networks Institute
>>>>>>>> Av. Mar del Mediterraneo, 22
>>>>>>>> 28918 - Leganés (Madrid) - Spain
>>>>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>>>>> fax: +34 481 6965
>>>>>>>>
>>>>>>>> On Wed, Jun 14, 2017 at 11:06 AM, Justin Tallon <
>>>>>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>>>>>
>>>>>>>>> Hey Nicola!
>>>>>>>>>
>>>>>>>>> Can you confirm that the libSoapySDR.so is present in your
>>>>>>>>> /usr/lib/ or /usr/lib/x86_64-linux-gnu/ folder ?
>>>>>>>>>
>>>>>>>>> I would not recommend installing source versions on top of binary
>>>>>>>>> installations as this can cause conflicts that produce problems down the
>>>>>>>>> line.
>>>>>>>>>
>>>>>>>>> Justin
>>>>>>>>>
>>>>>>>>> ____
>>>>>>>>> Justin Tallon Ph.D.
>>>>>>>>>
>>>>>>>>> Software Radio Systems (SRS)
>>>>>>>>> http://www.softwareradiosystems.com
>>>>>>>>>
>>>>>>>>> +353-86-067-0753 <+353%2086%20067%200753> |
>>>>>>>>> justin.tallon at softwareradiosystems.com
>>>>>>>>>
>>>>>>>>> On Wed, Jun 14, 2017 at 3:57 PM, Nicola Bui <nicola.bui at imdea.org>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I installed soapy, too.
>>>>>>>>>> The cmake log is attached.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> Nicola Bui
>>>>>>>>>>
>>>>>>>>>> Research Engineer
>>>>>>>>>> IMDEA Networks Institute
>>>>>>>>>> Av. Mar del Mediterraneo, 22
>>>>>>>>>> 28918 - Leganés (Madrid) - Spain
>>>>>>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>>>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>>>>>>> fax: +34 481 6965
>>>>>>>>>>
>>>>>>>>>> On Wed, Jun 14, 2017 at 10:50 AM, Justin Tallon <
>>>>>>>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hey Nicola!
>>>>>>>>>>>
>>>>>>>>>>> Could you post the output of your cmake ?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Thanks!
>>>>>>>>>>> Justin
>>>>>>>>>>>
>>>>>>>>>>> On 14 Jun 2017 5:41 p.m., "Nicola Bui" <nicola.bui at imdea.org>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Dear all,
>>>>>>>>>>>>
>>>>>>>>>>>> I am trying to make srsLTE work with LimeSDR, but cmake does
>>>>>>>>>>>> not find the LimeSuite package.
>>>>>>>>>>>> I am running it on a ubuntu 16.04 pc, limesuite is installed
>>>>>>>>>>>> and I correctly went through the tutorial examples of the LimeSuiteGui
>>>>>>>>>>>> (both the selfloop and the reception).
>>>>>>>>>>>>
>>>>>>>>>>>> Any suggestions before I am trying installing limesuite from
>>>>>>>>>>>> the sources?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>> Nicola Bui
>>>>>>>>>>>>
>>>>>>>>>>>> Research Engineer
>>>>>>>>>>>> IMDEA Networks Institute
>>>>>>>>>>>> Av. Mar del Mediterraneo, 22
>>>>>>>>>>>> 28918 - Leganés (Madrid) - Spain
>>>>>>>>>>>> mobile: +34 657 633 987 <+34%20657%2063%2039%2087>
>>>>>>>>>>>> phone: +34 91 481 6986 <+34%20914%2081%2069%2086>
>>>>>>>>>>>> fax: +34 481 6965
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> srslte-users mailing list
>>>>>>>>>>>> srslte-users at lists.softwareradiosystems.com
>>>>>>>>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-
>>>>>>>>>>>> users
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> srslte-users mailing list
>>> srslte-users at lists.softwareradiosystems.com
>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>
>>>
>>
>> _______________________________________________
>> srslte-users mailing list
>> srslte-users at lists.softwareradiosystems.com
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.softwareradiosystems.com/pipermail/srslte-users/attachments/20170706/37580b54/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cmake.log
Type: application/octet-stream
Size: 6773 bytes
Desc: not available
URL: <http://www.softwareradiosystems.com/pipermail/srslte-users/attachments/20170706/37580b54/attachment-0001.obj>


More information about the srslte-users mailing list