[srslte-users] UE only support EPS attach

Cedric Roux Cedric.Roux at eurecom.fr
Tue Apr 12 07:30:10 UTC 2016


you might try to set "sqn" to 0 for your correct user in the database
(via http://localhost/phpmyadmin on the hss machine, table users).
Or maybe "random". Or both.
It's just a maybe, I didn't check the code.
HTH.

On 12/04/16 02:08, David Yu ( III ) wrote:
> Hi Paul,
> For authentication failure,
> do you mean that some security related parameters I set in ue.conf is incorrect?
>
> Regards,
> David Yu
>
> -----Original Message-----
> From: openaircn-user-request at lists.eurecom.fr [mailto:openaircn-user-request at lists.eurecom.fr] On Behalf Of David Yu ( III )
> Sent: Monday, April 11, 2016 4:01 PM
> To: 'Paul Sutton'; 'Cedric Roux'
> Cc: openaircn-user at lists.eurecom.fr
> Subject: RE: UE only support EPS attach
>
> Hi all,
> In srsUE config file, we use the following usim info which is default value from OAI HSS DB:
>
> imsi = 208930000000002
> msisdn = 33638030002
> imei = 035609204079302
> key = 8baf473f2f8fd09487cccbd7097c6862
> OPc = 8e27b6af0e692e750f32667a3b14605d
>
> Does any other security parameters we should be modified?
>
> Regards,
> David Yu
>
> -----Original Message-----
> From: Paul Sutton [mailto:paul at softwareradiosystems.com]
> Sent: Monday, April 11, 2016 3:47 PM
> To: Cedric Roux; David Yu ( III )
> Cc: openaircn-user at lists.eurecom.fr
> Subject: Re: UE only support EPS attach
>
> Hi David, Cédric,
>
> The initial problem is that the network is not successfully authenticated by the UE. This is because the security parameters set in the UE and network do not match. In srsUE, these can be found in ue.conf.example under [usim].
> Cédric, you're correct that srsUE should respond with an authentication failure message in this case - we'll fix this for the next release.
> However, the lack of a response message is not the key problem here.
>
> Regards,
> Paul
>
> On 11/04/16 08:33, Cedric Roux wrote:
>> Hi, David,
>>
>> this is a problem with srs, not openair.
>> See in ue/src/upper/nas.cc, there is:
>>    if(net_valid)
>>    {
>>      nas_log->info("Network authentication succesful\n");
>>      for(int i=0; i<8; i++)
>>      {
>>        auth_res.res[i] = res[i];
>>      }
>>      liblte_mme_pack_authentication_response_msg(&auth_res,
>> (LIBLTE_BYTE_MSG_STRUCT*)pdu);
>>
>>      nas_log->info("Sending Authentication Response\n");
>>      rrc->write_sdu(lcid, pdu);
>>    }
>>    else
>>    {
>>      nas_log->warning("Network authentication failure\n");
>>      pool->deallocate(pdu);
>>    }
>> The UE should send something, MAC failure or something.
>> Here, srs just does nothing.
>>
>> You should address your issue directly to the srs team.
>>
>> Regards,
>> Cédric.
>>
>> On 11/04/16 05:27, David Yu ( III ) wrote:
>>> Hi Lionel,
>>>
>>> We tried to use srsUE, that has only EPS attach support, to access
>>> OAI EPC.
>>>
>>> we saw authentication fail from srsUE, but authentication request
>>> from OAI EPC.
>>>
>>> Could you help me to check this issue?
>>>
>>> Thanks.
>>>
>>> Regards,
>>>
>>> David Yu
>>>
>>> *From:*Lionel Gauthier [mailto:Lionel.Gauthier at eurecom.fr]
>>> *Sent:* Friday, April 08, 2016 8:53 PM
>>> *To:* 'DY'; openaircn-user at lists.eurecom.fr
>>> *Subject:* RE: UE only support EPS attach
>>>
>>> Hello,
>>>
>>> It should. Have to be tested, did you test that ?
>>>
>>> Regards,
>>>
>>> Lionel GAUTHIER.
>>>
>>> *From:*openaircn-user-request at lists.eurecom.fr
>>> <mailto:openaircn-user-request at lists.eurecom.fr>
>>> [mailto:openaircn-user-request at lists.eurecom.fr] *On Behalf Of *DY
>>> *Sent:* Friday 08 April 2016 12:23
>>> *To:* openaircn-user at lists.eurecom.fr
>>> <mailto:openaircn-user at lists.eurecom.fr>
>>> *Subject:* UE only support EPS attach
>>>
>>> Hi Eurecom,
>>> If UE only support EPS attach, no combined EPS/IMSI attach, then does
>>> UE can attach to OAI EPC successfully?
>>>
>>> Regards,
>>> David
>>>
>>
>
> --
> ________________________________________________________________
> Paul Sutton Ph.D.
>
> Software Radio Systems (SRS)
> http://www.softwareradiosystems.com
>
> +353-87-9813473 | paul at softwareradiosystems.com
>
> PGP Key ID: 3B4A5292
> Fingerprint: B0AC 19C9 B228 A6EB 86E1 82B2 90C7 EC95 3B4A 5292 ________________________________________________________________
>
>



More information about the srslte-users mailing list